which does not occupy the USB2.0 interface on the original base when using the product. This port is used for external wired gamepads to play games. When all four Switch/ Switch OLED MODEL (Joy-Con) L/R small gamepads are charging, the maximum output current of this output port is 500MA~800MA. When the total load current of all external handles of this product exceeds 1500MA, the output will be automatically turned off to achieve protection. Therefore, it is not recommended to charge digital products with high current charging externally at US2.0 port.

6. The product has two charging instructions: red light and green light. If there is no handle placed, only green light will be shown after power-on, and red light will be shown when the handle is charged.

7. Two game card slots are designed on the right side of the product, which can store two SWITCH game cards and place two commonly used game cards at any time.

8. beautiful appearance, more stable placement;

9. (Joy-Con) L/R small handle charging time ≤3.5 hours;

10. input current: 1.5A, input voltage: 5V DC, Joy-Con L/R handle charging current :250mA*4,USB2.0 port output current :500mA,USB2.0 port is only used for external wired handle to play games, not recommended for charging. When the four small handles are charging at the same time, the maximum output of the USB2.0 port on the right side is 500MA.

Special note: because the internal integrated circuit is used to detect the charging current of each handle to drive the indicator light to emit light, when the handle is about to be fully charged, the red and green indicators may blink alternately for a short time (about 5~15 minutes) and then turn green completely, which is a normal phenomenon.